DSC-HX1_L2
HELP
HELP12:
Assembling Method of ST Block
1
Insert the harness of flash unit in the ST base assy.
2
Arrange the harness to the space in the back.
Note:
Process it from upper side in white, orange
and pink.
3
Set the flash unit in the ST base assy.
6
Arrange the harness to the space.
Note:
Arrange it from upper side in white, orange
and pink.
7
Arrange the harness to slits in the bottom.
Note:
Arrange it from this side in white, orange
and pink.
8
Insert the plunger of the PL-003 flexible board
in the PL holder from the direction of the arrow
of figure.
9
Fix the PL-003 flexible board by claws.
PL Holder
PL-003 Flexible Board
Plunger
4
Attach the ST cover to the ST base assy.
0
Attach the PL holder to the ST base assy.
qa
Tighten up two screws.
5
Tighten up a screw.
Screw
Screw
ST Cover
Claw
Claw
Claw
Claw
Claw
Claw
Flash Unit
Space
Space
Slit
