background image

27

Op
erat

ion

Also, depending on the particular drive-disc combination, some CD-R and 
CD-RW discs may not be readable in some drives due to variations in disc 
quality and drive characteristics from one manufacturer to another.

Writable DVD Discs

The DVD/CD RW drive can write to DVD+R DL, DVD+R and DVD-R discs, 
as well as to DVD+RW and DVD-RW discs, when used with writing software. 
The playback (read) compatibility with DVD-ROM drives or DVD players of 
data written by this DVD/CD RW drive depends on the capabilities of the 
DVD-ROM drives or the DVD players and on the logical format selected when 
the disc is recorded (written).

DVD+R DL/DVD+R/DVD-R Discs

Data can be written to this type of disc only once. Once it has been written, it 
cannot be erased. Playback (read) compatibility of DVD+R and DVD-R discs 
with DVD-ROM drives or DVD players depends on the capability of the 
DVD-ROM drive and the DVD player and on the logical format selected when 
it is recorded (written).

DVD+RW and DVD-RW Discs

Data can be repeatedly written to or erased from this type of disc. Typically, a 
new DVD+RW or DVD-RW disc can be rewritten about 1,000 times.
Playback (read) compatibility of DVD+RW and DVD-RW discs with DVD-
ROM drives or DVD players depends on the capability of the DVD-ROM 
drive and the DVD player and on the logical format selected when it is 
recorded (written).

Disc Playback (Reading Data)

DVD+R DL/DVD+R/DVD-R discs, as well as DVD+RW and DVD-RW 
discs created and finalized with the DVD/CD RW drive can be played back on 
almost all DVD-ROM drives. However depending on the type of your drive, 
playback of DVD+R DL, DVD+RW, and DVD-RW discs may not be 
supported.
In addition, some drives do not support multi-session (DVD+R DL/DVD+R/
DVD+RW) or multi-border (DVD-R/DVD-RW). In these cases, you can only 
playback the disc in single-session (DVD+R DL/DVD+R/DVD+RW) or 
single-border (DVD-R/DVD-RW).
Also, DVD-Video discs created with the DVD/CD RW drive can be played 
back on many standard DVD players. However depending on the type of your 
player, playback of DVD+RW and DVD-RW discs may not be supported.
Further, because of the differences in quality and characteristics between 
various DVD-ROM drive, DVD player, DVD+R DL disc, DVD+R disc, 
DVD+RW disc, DVD-R disc, and DVD-RW disc manufacturers, playback 
may not be possible depending on the combination. (Playback compatibility is 
not under warranty.)

Summary of Contents for DRX-710UL





































Reviews: