8
GB
Printer rear panel
A
Handle
As illustrated below, raise the handle when
you carry the printer.
When you use the printer, close the handle to
its original position.
Notes
• When you carry the printer, make sure to
remove memory cards, USB memory, the
paper tray, AC adaptor, and other cables.
Otherwise malfunctions may occur.
• When using the DPP-FP75, set the LCD
panel to its original position.
B
Ventilation holes
C
Paper outlet
D
DC IN 24 V jack (
.
Plug the supplied AC adaptor into this
connector. Then connect the AC adaptor and
AC outlet with the power cord.
Printer left side panel
E
USB connector (
When using your computer, connect it via a
USB cable to this connector.
F
PictBridge/EXT INTERFACE
connector (
.
When using a PictBridge-compliant digital
camera, a USB memory, a Bluetooth USB
adaptor (DPPA-BT1*), or other external USB
device, connect it to this connector.
(*In some regions, the
DPPA-BT1 Bluetooth
USB adaptor is not sold.)