Sony DPP-F700 - Digital Photo Printer/frame, Operating Instructions Manual

Page: 32 / 110

32
GB
Using as a printer
Preparation
To use this unit as a printer, do the following.
Prepare the remote control (page 20).
Connect the AC power source (page 22).
Set this unit in the print position (flat position)
(page 32).
Set an ink ribbon (see page 33).
Set some print paper (see page 34).
Turn this unit on (page 23).
• For details of the remote control and AC
power source, see “Using as a photo frame.”
(page 20)
Setting this unit in the
print position
(flat position)
To use this unit as a printer, do the following.
1
Remove the stand.
2
Lay this unit flat (print position) and
open the paper tray compartment
door.
3
Tilt the display up.
Notes
• When using this unit in the print position, remove
the stand and put it in the space on the back of this
unit for storing it.
The stand is held in place by a magnet built into the
main unit.
• Do not keep this unit close to cards that may be
affected by magnets such as bank cards, credit
cards etc. Placing this unit close to a Braun TV
may change the colors on the TV screen.
3
2