85
GB
Printing from a PC (PC mode)
Printing from a PC (PC mode)
To print from a PC connected to the
printer, you need to install the supplied
software (printer driver and PictureGear
Studio) to your PC.
This section explains how to install the
supplied software on your PC and how
to use the supplied PictureGear Studio
software to print an image.
Please also refer to the operating
instructions of your PC.
On trademarks and copyrights of
PictureGear Studio
• On copyrights of design materials
The copyrights of the design materials
contained in this software are owned by
Sony Corporation or Sony Music
Communications Corporation. Any
commercial use is prohibited by the
copyrights laws.
• Duplication of copyrighted materials, such
as photographs, is prohibited except for
private or domestic use.
• All other companies and product names
mentioned herein may be the trademarks
or registered trademarks of their respective
companies. Furthermore, “™” and “
®
” are
not mentioned in each case in this manual.
Installing the
software
System requirements
To use the supplied software, your PC
must meet the following system
requirements:
System requirements for the printer
driver
OS: Microsoft Windows 98SE/Windows
Me/ Windows 2000 Professional/
Windows XP Home Edition/
Windows XP Professional, pre-
installed
CPU: Pentium II 400MHz or faster is
recommended.
RAM: 64 MB or more is recommended.
Hard disk space: 200 MB or more is
recommended.
System requirements for PictureGear
Studio
OS: Microsoft Windows 98SE/Windows
Me/ Windows 2000 Professional/
Windows XP Home Edition/
Windows XP Professional, pre-
installed (IBM PC/AT compatible)
(Windows 95, Windows 98 Gold
Edition, Windows NT, other
versions (ex. Server, Personal) of
Windows 2000 are not supported.)
CPU: Pentium III 500MHz or faster
(Pentium III 800MHz or faster is
recommended.)
Continued
Summary of Contents for DPP-EX50
Page 138: ...138 GB x Small size Frames ...
Page 143: ...143 GB Additional information ...
Page 144: ...Sony Corporation Printed in Korea ...