7
DP-IF8000
• MICON-DECODER period
Check the DEC_XCS (IC11-2pin), SCK1 (IC11-1pin), SDO1 (IC11-
143pin), SDI1 (IC11-144pin).
Figure 19 shows the view on the monitor after power is turned on,
at the instant of switching with the OUTPUT key. The timing is
shown in detail in FIG. 20.
Fig 19
DEC_XCS
SCK 1
SDO 1
SDI 1
Sending the
24 bit data
Receiving the
24 bit data (example)
Fig 20
DEC_XCS
SCK 1
(1MHz)
SDO 1
SDI 1
• MICON-MAIN DSP period
Check the DSP_XCS (IC19-2pin), SCK1 (IC19-1pin), SDO1 (IC19-
143pin), and the DSP_XHREQ (IC19-3pin).
Figure 21 shows the view on the monitor after power is turned on,
at the instant of switching with the OUTPUT key. (The detailed
timing is the shown as shown in FIG. 20.
Fig 21
DSP_XCS
SCK 1
(1MHz)
SDO 1
DSP_XHREQ
Start of 24 bit data transfer, at 2nd bit, HREQ
t
1
After transfer of 24 bit data, HREQ
t
0
2.2 Headphones
2.2.1 Audio System
Note:
Switch to Digital Input mode by connecting the optical cable
to DIGITAL IN 1 or 2, and pressing the INPUT key.
• DIAT-DSP period
Check the LRCK/RCS (IC501-94pin), BCK (IC501-6pin),
DIAT_OUT (IC501-20pin), RINFO (IC501-19pin).
Turn the power on, set in Digital Input mode, and select VIRTUAL
FRONT, or VIRTUAL 5.1 or VIRTUAL 6.1 with the OUTPUT
key.
Turn the headphone power on.
The view on the monitor when the input source sampling frequency
to the processor is 48 kHz is shown in Fig. 22.
The view on the monitor when the input source sampling frequency
to the processor is 44.1 kHz is shown in Fig. 23.
The view on the monitor when the input source sampling frequency
to the processor is 32 kHz is shown in Fig. 24.
The view on the monitor when OFF is selected with the OUTPUT
key is shown in Fig. 25. The detailed timing is shown in Fig. 26.
Fig 22
LRCK/RCS
BCK
DIAT_OUT
RINFO
0001000
t
fs=48k
Note 7: fs=48kHz
Fig 23
LRCK/RCS
BCK
DIAT_OUT
RINFO
0000000
t
fs=44.1k
Note 8: fs=44.1kHz
Fig 24
LRCK/RCS
BCK
DIAT_OUT
RINFO
0011000
t
fs=32k
Note 9: fs=32kHz
Fig 25
Lch
Rch
LRCK/RCS
BCK
DIAT_OUT
RINFO
Note 10: Only LRCK, BCK and DATA are enabled. RINFO
is disabled.
Fig 26
LRCK/RCS
BCK
DIAT_OUT
RINFO
• DSP-DAC period
Check the LRCK (IC102-16pin), BCK (IC102-14pin), and
DSP_OUT (IC102-15pin).
Turn on the processor and set to Digital Input mode. Turn on the
headphone power, and apply an input source signal (any kind is
okay) to the processor.
The view on the monitor is shown in Fig. 27, and the detailed tim-
ing is shown in Fig. 28.
Fig 27
LRCK
BCK
DSP_OUT
Lch
Rch
Fig 28
LRCK
BCK
DSP_OUT
1 bit offset (I
2
S format)
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
