102
GB
Ad
v
anced Operations Miscellaneous
Operation by Remote Control
Using the supplied remote control RM-S7D, you can perform the same operations as with the release
button and shift dial operations on the camera itself.
The remote control is convenient when you want to take pictures without holding the camera or for
playing back pictures on a television.
Further, when operating from a position where the camera cannot receive the remote control signal,
connect the camera and remote control with the remote control cable (supplied).
REM
OTE
Note
The self-timer lamp on the front of the camera lights up briefly as signals from the remote control are
received.
When you push the release button with the focus mode switch set to AF, the focus is automatically set
before the picture is taken. There is a short time lag from the time you press the release button until
the picture is taken.
If you want to take a picture without the time lag set the focus mode switch to MF. After manually
adjusting the focus, press the release button to take the picture.
Inserting the Battery into the Remote Control
1
Slide the battery cover in the direction of the
v
mark while pushing the cover.
Send buttons
Send buttons perform the
same function as the shift
dial on the camera unit
(but only plays back
pictures one at a time in
PLAY mode).
Release button
(Effective in CAM mode)
Remote Control Terminal
Summary of Contents for DKC-FP3
Page 11: ...11 GB Introduction Memory Stick 1 Memory Stick PC Card Adaptor 1 ...
Page 126: ...126 GB Index ...
Page 127: ...127 GB Index ...
