Sony Digital Handycam DCR-PC100E, Service Manual

Page: 151 / 215

5-32
4. White Balance Adjustment (VF-138 board)
Correct the white balance.
If deviated, the reproduction of the EVF screen may degenerate.
Mode Camera
Subject Arbitrary
Measurement Point Check on EVF screen
Measuring Instrument
Adjustment Page D
Adjustment Address 71, 72
Specified Value The EVF screen should not be colored.
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2) Select page: 3, address: 0C, set data: 60, and press the PAUSE
button of the adjustment remote commander.
3) Select page: 3, address: 22, set data: 0B, and press the PAUSE
button.
4) Select page: D, address: 71 and 72, set the data to the initial
value.
Note: Press the PAUSE button each time to set the data.
5) Check that the EVF screen is not colored. If colored, change
the data of page: D, address: 71 and 72 so that the EVF screen
is not colored.
Note:
To write in the non-volatile memory (EEPROM), press the
PAUSE button each time to set the data.
6) Select page: 3, address: 22, set data: 00, and press the PAUSE
button.
7) Select page: 3, address: 0C, set data: 00, and press the PAUSE
button.
8) Select page: 0, address: 01, and set data: 00.
Address
71
72
Data
A6
A2