![background image](http://html.mh-extra.com/html/sony/dhc-nx5md/dhc-nx5md_operating-instructions-manual_420526046.webp)
46
4
Press ENTER/YES again.
“—Rehearsal—” and “Point A ok?” appear
alternately while the deck repeats the portion
from a few seconds before point A to point
A.
5
While monitoring the sound, turn MD
JOG to find the starting point of the
portion to be erased (point A).
You can shift the starting point by 1/86
second (1 frame)* intervals.
To shift the point by minute or second
intervals, press MD
m
or
M
so that
minute or second flashes, then turn MD JOG.
* You can shift the starting point by 2-frame
intervals (tracks recorded in Monaural or LP2
Stereo mode) or by 4-frame intervals (tracks
recorded in LP4 Stereo mode).
6
Repeat step 6 until point A is played
correctly.
7
Press ENTER/YES if point A is correct.
“Point B Set” appears and playback for
setting the ending point of the portion to be
erased (point B) starts.
8
Continue playback until the deck
reaches point B, then press ENTER/
YES.
“A-B Ers” and “Point B ok?” appear
alternately and the deck repeats a portion of
the few seconds before point A and after
point B successively.
9
Turn MD JOG to find point B.
The procedure is the same as step 6.
10
Press ENTER/YES if point B is correct.
“Complete!” appears for a few seconds and
the portion between point A and B is erased.
To cancel A-B Erase
Press MENU/NO.
To return to the condition before
erasing
You can return to the original condition
immediately after erasing the tracks (see page 51).
Note
If “Impossible” appears, the specified portion cannot
be erased. This happens when you have edited the
same track many times. This is due to a technical
limitation of the MD system and is not a mechanical
error.
Erasing recordings (continued)