30
Control
DFW-SX910/X710
Step 2
MaxSize is read out.
UnitSize is read out.
ColorCoding is read out.
Set the image position.
Set the image size.
Set the color coding ID.
Set the SettingBit.
Wait until the SettingBit falls.
Error
Check ErrorFlag 1.
No error
Go to Step 3.
Read F0F10000. 050003C0h is returned,
showing the maximum image size is 1280
×
960.
Read F0F10004h. 0050003Ch is
returned, showing the unit size is 80
×
60.
Therefore, the screen can be divided into
256 sections (16
×
16, vertically and
horizontally.)
Read F0F10014h. E0000000h is
returned, showing Mono8, YUV4:1:1, and
YUV4:2:2 are available.
Write 018000F0h in F0F10008h.
(Horizontal position = 320, Vertical
position = 240)
Write 028001E0h in F0F1000Ch.
(Width = 640, Height = 480)
Write 02000000h in F0F10010h.
(YUV4:2:2 = 2)
Write C0000000h in F0F1007Ch.
Read F0F1007Ch. Wait until Bit 1 falls.
Read F0F1007Ch. Check that Bit 8 is not
set. If an error occurs, the setting was
wrong. Try other settings.
When using IIDC v1.20, skip the
procedures described within the broken
line.
