1-25 (E)
DFP-R3000
Step 2. Installing the DFP-R3000 to the Projector
1.
Attach the optional guide (35 mm) to the DFP-R3000
with hexagon cap screw (4
x
10), plane washer and
spring washer (SW4).
2.
Install the DFP-R3000 tentatively in the adapter(A)
with four hexagon cap screws (M4
x
12)
4
, four
washer (W4) and four spring washers (SW4).
3.
Put the film on the projector from the DFP-R3000 and
adjust the position (arrow direction A) of DFP-R3000
so that the film is smoothly fed onto the projector.
4.
After the adjustment has been completed, tighten the
four hexagon cap screws (M4
x
12)
4
.
5.
Reattach the REEL ARM of the projector tentatively
to the DFP-R3000 with two hexagon cap screws (3/8-
16)
5
.
n
Fixing hole position of the DFP-R3000 varies depend-
ing on the REEL ARM to be used.
6.
Set the film to the DFP-R3000 from the REEL ARM,
and adjust the installation position of the REEL ARM
so that the film runs smoothly and the tension on both
edges of the film is even.
7.
After the adjustment has been completed, tighten the
two hexagon cap screws (3/8-16)
5
.
8.
Connect the DFP-R3000 to the DFP-D3000.
(Refer to “5-3. Connection to the DFP-D3000”.)
9.
After the connection is completed, perform “5-4.
Checking and Adjustment After Installation”.
2. Installing Example 2 (Using adapter (EA))
The procedure for installing using the adapter (EA) is the
same as the procedure for installing to SIMPLEX35. For
details on performing this procedure, refer to “5-2-1.
Installing to SIMPLEX35 (Strong International)”.
4
Spring washer
(SW4)
Spring washer (SW4)
Washer (W4)
Washer (W4)
Washer (W4)
Hexagon cap
screw(M4
x
12)
4
Hexagon cap screw
(M4
x
12)
Projector
P35
Adapter (H)
Optional guide
(35 mm)
Adapter (A)
Hexagon cap screw (3/8-16)
5
DFP-R3000
REEL ARM
5
Hexagon cap
screw (4
x
10)
Washer (W4)
Spring washer (SW 4)
A