Sony DCRTRV250 - Digital8 Camcorder With 2.5" LCD, Service Manual, Page: 100 / 147

1-2E
DCR-TRV250
&
: Points added portion.
-
: Points changed portion.
1-2. CCD TYPE CHECK
Type of CCD imager can be identified with its serial No.. Check the serial No. printed on the MODEL NUMBER LABEL.
Note: About VC-304/VC-305 board and CCD imager, discriminate CCD type on the machine, and replace same type.
Serial No. CCD type VC board
310001 to 310300,
320071 to 341220,
341521 to 341720,
342421 to 342720,
820001 to 821100,
850001 to 854200,
860001 to 863400,
940001 to 940600
TYPE SO VC-305 (TYPE SO)
1320001 to 1333500 TYPE PA VC-305 (TYPE PA)
other numbers TYPE SO VC-304 (TYPE SO) *1
*1: VC-304 board is TYPE SO only
MODEL NUMBER LABEL
1-3. JIG MODIFICATION (VC-305 TYPE only)
*
Connect the LANC SIG pin of the I/F unit for LANC control to the land of pin 1 of the CPC jig connector with a jumper wire.
This modification is required in the DCR-TRV250 (VC-305 TYPE) only. Be sure to disconnect the jumper wire when using the I/F unit for
LANC control or CPC jig connector on DCR-TRV250 (VC-304 TYPE).
1
CPC jig connector
(J-6082-539-A)
LANC jack
LANC
jack
The other side
CX2000
CN1
I/F unit for LANC control
(J-6082-521-A)
[
Ver 1.2 2003.03
Serial No.