35
Advanced operations
You can make a recording with a stop-motion animated effect using cut recording. To
create this effect, alternately move the subject a little and make a cut recording. Secure
the digital camcorder and use the Remote Commander for effective cut recording.
(
1
)
While the digital camcorder is in Standby mode, open the cover, then press MENU
to display the menu in the viewfinder.
(
2
)
Press
or
to select FRAME REC, then press EXECUTE.
(
3
)
Press
or
to select ON, then press EXECUTE.
(
4
)
Press MENU to erase the menu display.
(
5
)
Press START/STOP on the digital camcorder or the Remote Commander to start
cut recording.
The digital camcorder records about 6 frames, then enters recording Standby mode.
(
6
)
Move the subject, and repeat step 5.
Cut recording
1
2
3
5
MENU
D ZOOM OFF
16 : 9 WIDE
ZEBRA
COMMANDER
BEEP
FRAME REC
INT REC
[ MENU ] : END
MENU
FRAME REC OFF
ON
[ MENU ] : END
MENU
D ZOOM
16 : 9 WIDE
ZEBRA
COMMANDER
BEEP
FRAME REC ON
INT REC
[ MENU ] : END
START/STOP
MENU
To cancel cut recording
Set the FRAME REC mode to OFF in the menu system.
Notes on cut recording
• The portion immediately after cut recording is completed may be longer than four
frames.
• You cannot do cut recording with photo recording.
• The remaining tape indicator may not be accurate if you do cut recording repeatedly.
If you change the mode as follows, cut recording is cancelled
• Turn STANDBY down to LOCK.
• Set the POWER switch to OFF or CAMERA/VTR to VTR.
Summary of Contents for DCR-VX9000
Page 95: ...95 Additional information ...
