manualshive.com logo in svg

Sony DCR-TRV70 - Digital Handycam Camcorder, Operating Instructions Manual

Share
Download
Sony DCR-TRV70 - Digital Handycam Camcorder Operating Instructions Manual Download Page 94

94

Connecting the microphone (optional) to the intelligent
accessory shoe

Slide the shoe cover to remove it. Then, connect the external microphone (optional) to
the intelligent accessory shoe.

Connecting the A/V connecting cable to the AUDIO/VIDEO jack

Note

When dubbing with the AUDIO/VIDEO jack or the built-in microphone, pictures are
not output through the S VIDEO jack or AUDIO/VIDEO jack. Check the recorded
picture on the screen. You can check the recorded sound by using headphones.

Audio dubbing

Microphone (optional)

Intelligent
accessory
shoe

Shoe cover

LINE OUT

L

R

AUDIO/
VIDEO

AUDIO R

Audio equipment

: Signal flow

White

Red

A/V connecting cable (supplied)

AUDIO L

Do not connect the
video (yellow) plug.

Summary of Contents for DCR-TRV70 - Digital Handycam Camcorder





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands