142
Recording superimposed images on a “Memory Stick” as a still
image
Before operation
Insert a “Memory Stick” recorded still images into your camcorder.
(
1
)
Set the POWER switch to MEMORY/NETWORK (DCR-TRV50 only). Make
sure that the LOCK switch is set to the left (unlock) position.
(
2
)
Press FN and select PAGE2.
(
3
)
Press MEM MIX. The last recorded or last composed image appears on the
lower part of the screen as a thumbnail image.
(
4
)
Press –/+ on the right lower corner of the screen to select the still image which
you want to superimpose.
– : To see the previous image
+: To see the next image
(
5
)
Press a desired mode. The still image is superimposed on the moving picture.
(
6
)
Press –/+ on the left lower corner of the screen to adjust the effect, then press
OK to return to PAGE2.
M. CHROM:
Blue chroma key (only blue background portion) to extract a
still image and superimpose it on a moving image
M. LUMI:
Brightness level used when extracting a still image and
superimposing it on a moving image
C. CHROM:
Blue chroma key (only blue background portion) to extract a
moving picture and superimpose it on a still image
The fewer bars there are on the screen, the stronger the effect.
(
7
)
Press EXIT to return to FN.
(
8
)
Press PHOTO deeper to start recording.
The image displayed on the screen will be recorded on a “Memory Stick.”
Recording is complete when the bar scroll indicator disappears.
Superimposing a still image in the “Memory Stick” on an image
– MEMORY MIX
