2-10
DCR-TRV22/TRV22E
2-9. HINGE (40) ASSEMBLY
A
2
3
3
5
Hinge cover (C) (40)
Hinge (40) assembly
9
Harness (PV-140)
7
Hinge cover (M) (40)
q;
Hinge (40) assembly
Remove the Harness (PV-140) in the direction
of the arrow
Bend the Harness (PV-140) along with connector
8
Remove the FP-626 flexible board
that is attached by the doble-sided tape
4
Three claws
Dowel for setting
the position
6
Screw
(M1.7
×
4),
lock ace, p2
B
1
Screw
(M1.7
×
4),
lock ace, p2
2
Rotate to the "A" marked portion
counterclockwise by 90 degrees
3
Rotate the "B" marked portion
counterclockwise by 90 degrees
in the direction of the arrow
Rotation of the LCD panel has limitation due to its hinge
in this model. Excessive force to rotate the LCD panel
damages the hinge.
(Refer to "Caution"of 2.1 Pcabinet assembly.)
Caution
If the FP-626 flexible board is removed once, the
adhesion strength of a double-sided tape decreases.
Use the new FP-626 flexible board at the time of an
assembly.
Caution
