2-19
DCR-TRV12E/TRV14E/TRV19/TRV19E
VA-118 board
CN5402
CN4002
CN1002
CN1004
CN4602
IC4101
CN4004
VA-118
VC-311
JK-242
IC4101
20
4
1
21
40
41
60
61
80
1
1
8
9
16
16
VC-311 board
Adjustment remote
commander (RM-95)
LANC jack
MA-421 board
JK-242 board
AUDIO/VIDEO jack
F panel section
AC power
adaptor
Monitor TV
AC IN
CPC-7 jig
(J-6082-382-A)
DC-IN jack
Power harness
GND pattern
Control switch block (FK-CX4000)
(J-6082-382-A)
Need not be connected
Mechanism deck
To eject the cassette, short the circuit
between Pin
4
of IC4101 and GND
pattern on VA-118 board for 1 second.
(To eject the cassette, short the circuit between Pin
4
of IC4101 and GND pattern on VA-118 board for 1 second.)
[SERVICE POSITION TO CHECK THE VTR SECTION]
Connection to Check the VTR Section
To check the VTR section, set the VTR to the “Forced VTR power ON” mode.
Operate the VTR functions using the adjustment remote commander (with the HOLD switch set in the OFF position).
Setting the “Forced VTR Power ON” mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 02, and
press the PAUSE button of the adjustment remote
commander.
Exiting the “Forced VTR Power ON” mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 00, and press
the PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
Extension cable (100P)
(J-6082-352-A)
1
2-2. CABINET (R) COVER (39E) ASSEMBLY ........
2
2-3. F PANEL SECTION ........................................
3
2-5.
CABINET (R) SECTION ...................................
4
2-10. BT PANEL/EVF SECTION ...........................
5
2-14. VA-118 BOARD, LENS SECTION ................
6
2-16. MECHANISM DECK, VC-311 BOARD (1) ....
7
2-17. MECHANISM DECK, VC-311 BOARD (2) ....
(page 2-4)
(page 2-5)
(page 2-7)
(page 2-11)
(page 2-15)
(page 2-16)
(page 2-17)
PROCEDURE OF REMOVING MECHANISM DECK
