manualshive.com logo in svg

Sony DCR-HC32 - Handycam Camcorder - 20 x Optical Zoom, Operating Manual, Page: 100 / 123

Share
Download
Sony DCR-HC32 - Handycam Camcorder - 20 x Optical Zoom Operating Manual Download Page 100

100

DCR-HC32E/HC33E/HC39E/HC42E/HC43E 2-584-907-11(1)

 PictBridge compliant printer

Check the connected device.

• Switch off the printer and switch it on 

again, then disconnect the USB cable 
and reconnect it.

Connect the camcorder to a 

PictBridge compatible printer.

• Switch off the printer and switch it on 

again, then disconnect the USB cable 
and reconnect it.

Error-Cancel the task.

• Check the printer.

Cannot print. Check the printer.

• Switch off the printer and switch it on 

again, then disconnect the USB cable 
and reconnect it.

 Flash

Charging… Cannot record still 

images.

• You are trying to record a still image 

while charging the flash (optional).

 Others

Cannot record due to copyright 

protection 

(p. 103)

.

Cannot add audio. Disconnect the 

i.LINK cable 

(p. 61)

.

Not recorded in SP mode. Cannot 

add audio 

(p. 61)

.

Not recorded in 12-bit audio. Cannot 

add audio 

(p. 61)

.

Cannot add audio on the blank 

portion of a tape 

(p. 61)

.

Cannot add audio 

(p. 61)

.

 Dirty video head. Use a cleaning 

cassette 

(p. 109)

.

Cannot start Easy Handycam 

Cannot cancel Easy Handycam 

(p. 

18)

.

USB is invalid in this mode during 

Easy Handycam

• You can select [STD-USB] when you 

set the POWER switch to PLAY/EDIT 
during Easy Handycam operation, but 
you cannot select [PictBridge] or [USB 
STREAM]. (The message disappears 
when you touch 

.)

HDV recorded tape. Cannot 

playback.

•

  Your camcorder cannot play back this 

format. Play back the tape with the 
equipment that recorded it.

HDV recorded tape. Cannot add 

audio.

• Your camcorder does not allow you 

to add audio on a section of a tape 
recorded in HDV format.

Warning indicators and messages 

(continued)

Summary of Contents for DCR-HC32 - Handycam Camcorder - 20 x Optical Zoom




























































































































Reviews:

No comments