Troubleshooting
118
Dubbing/Editing
Image protection cannot be applied.
c
When you are using the “Memory Stick Duo” with the write-protect tab,
release the lock on the write-protect tab of the “Memory Stick Duo.”
(p. 127)
c
Perform the operation again on the index screen. (p. 107)
Cannot mark pictures for print.
c
When you are using the “Memory Stick Duo” with the write-protect tab,
release the lock on the write-protect tab of the “Memory Stick Duo.”
(p. 127)
c
Perform the operation again on the index screen. (p. 108)
• The maximum number of pictures you can mark for print is 999.
• Movies cannot be marked for print.
The data file name is not indicated
correctly.
• Only the file name is displayed if the directory structure does not
conform to the universal standard.
• The file is damaged.
• The file format is not supported on your camcorder. (p. 126)
The data file name flashes.
• The file is damaged.
• The file format is not supported on your camcorder. (p. 126)
Symptom
Cause and/or Corrective Actions
Pictures from connected devices are
not displayed on the LCD screen or
the viewfinder.
• Cannot change the setting of the A/V jack during Easy Handycam
operation.
c
Cancel Easy Handycam operation (p. 54), and then set [VIDEO
INPUT] to the appropriate signal in the
(STANDARD SET)
menu. (p. 85)
c
Set [VIDEO INPUT] to the appropriate signal in the
(STANDARD
SET) menu. (p. 85)
c
Set [DISPLAY] to [LCD PANEL] in the
(STANDARD SET)
menu. (p. 87)
Cannot dub correctly using the A/V
connecting cable.
c
Set [VIDEO INPUT] to the appropriate signal in the
(STANDARD
SET) menu. (p. 85)
c
Set [DISPLAY] to [LCD PANEL] in the
(STANDARD SET)
menu. (p. 87)
• The A/V connecting cable is not connected properly.
c
Make sure that the A/V connecting cable is connected to the proper
jack, i.e. to the output jack of a device you are dubbing a picture from,
or to the input jack of another device for dubbing a picture from your
camcorder.
Pictures from connected devices are
not displayed correctly.
• The input signal is not NTSC. (p. 94)
New sound added to a recorded tape
is not heard.
c
In the
(STANDARD SET) menu, adjust [AUDIO MIX] from the
[ST1] (original sound) side until the sound is heard appropriately. (p. 84)
A title is not recorded/A cassette label
is not recorded.
c
Use a cassette with Cassette Memory. (p. 125)
c
Erase unnecessary titles when the Cassette Memory is full. (p. 81)
c
Set the write-protect tab to REC. (p. 125)
• A title cannot be added to a blank section of the tape.
Symptom
Cause and/or Corrective Actions
Summary of Contents for DCR-HC30 - Handycam Camcorder - 680 KP
Page 147: ......
