background image

29

Ge
tting Star

ted

4

Close the disc cover.

The [DISC ACCESS] screen appears.
It may take some time to recognize the 
disc depending on the disc type and 
condition.

x

DVD-R

You can start recording immediately after 
[DISC ACCESS] disappears from the 
LCD screen. You do not need to proceed 
to steps after step 

5

.

x

DVD-RW

Select the recording format, then format 
the disc. Proceed to step 

5

.

x

DVD+RW

Select the aspect ratio of the recording 
movie, then format the disc. Proceed to 
step 

6

.

• During Easy Handycam operation (p.33), 

[Format the disc? If not, remove the disc.] 
appears. Touch 

, then proceed to step 

8

.

5

Select the recording format for a 
DVD-RW, and touch 

, then 

proceed to step 7.

x

VIDEO mode

 

You can play back the disc on most of 
DVD devices if you finalize it.

x

VR mode

 

You can edit, delete pictures, or divide 
movies on your camcorder (p.87). 
However, the disc can be played back 
only on DVD devices that support VR 
mode when you finalize it.

6

Select the aspect ratio of the 
recording movie ([16:9 WIDE] or 
[4:3]) for DVD+RW, then touch 

.

x

16:9 WIDE

 

You can record wide-angle high-
resolution pictures. If you intend to view 
pictures on a wide TV, selecting [16:9 
WIDE] is recommended.

x

4:3

 

You can record to play back pictures on 
a 4:3 TV.

7

Touch [YES] 

t

 [YES].

8

Touch  

when 

[Completed.] 

appears.

When the formatting is completed, you 
can start recording on the DVD-RW/
DVD+RW.

• Do not remove the battery pack or disconnect 

the AC Adaptor while formatting.

To remove the disc

Perform step 

1

 and 

2

 to open the disc cover, 

then remove the disc.

• Do not apply shock or vibration to your camcorder 

while the ACCESS lamp lights up or flashes, or 
[DISC ACCESS] or [PREPARING TO OPEN] is 
displayed on the LCD screen.

• It may take some time to remove the disc 

depending on the disc condition or recorded 
materials.

• It may take up to 10 minutes to remove a disc if 

it is damaged or is dirty with fingerprints, etc. In 
that case, the disc might be damaged.

VR

VIDEO

Can playback on 

var ious DVD devices.

Cannot edit in Camcorder

FORMAT :

VIDEO

OK

4:3

16:9

WIDE

Select aspect ratio of

movie to be recorded.

For mat again to change.

FORMAT :

16:9 

OK

Summary of Contents for DCR DVD505 - 4MP DVD Handycam Camcorder

























































































































































Reviews: