manualshive.com logo in svg

Sony DCR DVD101 - VCL0625S Wide Conversion Lens x 0.6, Operating Instructions Manual, Page: 121 / 148

Share
Download
Sony DCR DVD101 - VCL0625S Wide Conversion Lens x 0.6 Operating Instructions Manual Download Page 121

121

Troubleshooting

During recording

Symptom

Cause and/or Corrective Actions

• The mode dial is set to 

 (Play/Edit).

c

Set it to 

 (Movie) or 

 (Still). (pages 29, 35)

• The disc has run out of space.

c

Use a new disc or format the disc (DVD-RW only, page
74)

• The disc has been finalized.

c

Unfinalize the disc (DVD-RW only) or use a new disc.
(page 72)

• Shooting by swapping movies and still images frequently

reduces the remaining capacity of the disc and may
prevent you from shooting movies.

• Your camcorder powered by the battery pack turns off for

more than five minutes with no operations performed.

c

Press the POWER button for a few seconds.

c

Set [A. SHUT OFF] to [NEVER] in 

 (SETUP MENU)

in the SETUP display. (page 115)

• The battery pack is exhausted or nearly exhausted.

c

Install a charged battery pack. (page 15)

• [STEADYSHOT] is set to [OFF] in 

 (CAMERA SET) in

the SETUP display.

c

Set it to [ON]. (page 112)

• The setting is set to manual focus.

c

Press FOCUS to set the autofocus. (page 52)

• Shooting conditions are not suitable for autofocus.

c

Adjust the focus manually. (page 52)

• The contrast between the subject and background is too

high. This is not a malfunction.

• This is not a malfunction.

• Super NightShot Plus or Color Slow Shutter is activated.

This is not a malfunction.

Pressing START/STOP or PHOTO
does not record movies/still
images.

The power goes off.

SteadyShot does not work.

Autofocus does not work.

A vertical band appears when you
shoot a subject such as lights or a
candle flame against a dark
background.
A vertical band appears when you
shoot a very bright subject.
Some tiny white, red, blue or green
spots appear on the display.

Types of trouble and corrective action

Summary of Contents for DCR DVD101 - VCL0625S Wide Conversion Lens x 0.6





















































































































































Reviews:

No comments