Sony DAV-LF1H, Operating Instructions Manual

Page: 95 / 127

A
d
v
a
n
ced
Settin
g
s a
nd A
d
justm
e
nt
s
95
GB
Does your TV accept progressive
signals?
Progressive is the method for displaying TV
images which reduces flickering, and sharpens
the image. To display using this method, you
need to connect to a TV that accepts progressive
signals.
“PROGRE” lights up in the front panel display
when the system outputs progressive signals.
1
Press FU/– repeatedly to select
“DVD.”
2
Press PROGRESSIVE.
Each time you press PROGRESSIVE, the
display changes as follows:
x PROGRE AUTO (PROGRESSIVE AUTO)
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT
VIDEO OUT jacks.
Normally select this under the above condition.
This automatically detects the software type,
and selects the appropriate conversion method.
Note that the picture will not be clear or no
picture will appear if you select these settings
when either of the above conditions are not met.
x PROGRE VIDEO (PROGRESSIVE VIDEO)
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT
VIDEO OUT jacks, and,
– you want to fix the conversion method to
PROGRESSIVE VIDEO for video-based
software.
Select this if the image is not clear when you
select PROGRESSIVE AUTO.
Note that the picture will not be clear or no
picture will appear if you select these settings
when either of the above conditions are not met.
x INTERLACE
Select this setting when:
– your TV does not accept progressive signals,
or,
– your TV is connected to jacks other than the
COMPONENT VIDEO OUT jacks (EURO
AV
T
OUTPUT (TO TV)).
You cannot select INTERLACE while “HDMI”
lights up in the front panel display.
PROGRESSIVE
With the cover opened.
FUNCTION
+/–
t
PROGRE AUTO
(PROGRESSIVE AUTO)
r
PROGRE VIDEO
(PROGRESSIVE VIDEO)
r
INTERLACE
continued