Se
tti
ng
s an
d Ad
ju
st
me
n
ts
77
GB
To obtain the best possible surround sound, set
for the size of the speakers you have connected
and their distance from your listening position.
Then use the test tone to adjust the level and the
balance of the speakers to the same level.
Select [SPEAKER SETUP] in the Setup
Display. For details, see “Using the Setup
Display” (page 72).
The default settings are underlined.
• You cannot operate these setup items when you
connect headphones to the system.
To return to the default setting
when changing a setting
Select the item, then press CLEAR. Note that
only the [SIZE] setting does not return to the
default setting.
x
[SIZE]
If you do not connect center or surround
speakers, or move the surround speakers, set the
parameters for [CENTER] and [SURROUND]
and specify the surround speaker position. Since
the front speaker setting is fixed, you cannot
change them.
• When you select an item, the sound cuts off for a
moment.
• Depending on the settings of other speakers,
subwoofer may be excessive.
x
[DISTANCE]
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 27), the settings is automatically
displayed.
Settings for the Speakers
[SPEAKER SETUP]
Note
SPEAKER SETUP
DISTANCE:
LEVEL(FRONT):
LEVEL(SURROUND):
OFF
TEST TONE:
FRONT:
CENTER:
YES
BEHIND
YES
YES
SURROUND:
SUBWOOFER:
SIZE:
[FRONT]
[YES]
[CENTER]
[YES]: Normally select this.
[NONE]: Select this if no center
speaker is used.
[SURROUND]
[BEHIND]: Select this if surround
speakers are located in section
B
.
[SIDE]: Select this if surround
speakers are located in section
A
.
[NONE]: Select this if no
surround speaker is used.
[SUBWOOFER]
[YES]
Note
90
20
45
A
A
B
B
Position diagram
continued
Summary of Contents for DAV-DX150 - Dvd Home Theater System
Page 100: ...Sony Corporation Printed in China ...
