61
Other Operations
FUNCTION
Watching the Video or
other Unit
You can use VCRs or other units connected
to the VIDEO 1 or VIDEO 2 jacks. Refer to
the operation manual supplied with the unit
for farther information on the operation.
Press FUNCTION repeatedly until
VIDEO 1 or VIDEO 2 that you connected
the unit to appears on the front panel
display.
Each time you press FUNCTION, the mode
of the system changes in the following
sequence.
DVD
t
VIDEO 1
t
VIDEO 2
t
TUNER
t
DVD...
1
2
3
4
5
6
7
>10
10/0
8
9
Controlling the TV
You can control your TV using the buttons
below.
By pressing
You can
TV
[
/
1
Turn the TV on or off.
TV/VIDEO
Switch the TV’s input source
between the TV and other input
sources.
Switching between TV and DVD
Using the CONTROL DVD/TV switch, you
can switch the remote signal between
control of the TV and control of the DVD
unit. When you watch the DVD, ensure that
you have the CONTROL DVD/TV switch
set to DVD.
The table below shows the buttons that are
affected by the CONTROL DVD/TV switch.
Button
DVD
TV
1~9,**
Standard number Regardless of
>10,
button function
the number
10/0
for DVD.
button pressed,
the channel
advances in
numerical order.
ENTER
Standard enter
Skips to channel
function for
12.
DVD.
.
Standard
CH –
preceding title,
chapter skip
function for
DVD.
>
Standard forward CH +
title, chapter
skip for DVD.
3
VOL +
VOL +
#
VOL –
VOL –
Note
Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
* Use the number buttons only to enter the code
number of controllable TVs.
** For double digit number, press >10, then the
number. (For example, press >10, then 2 and 5 for
entering 25.)
