89
Ot
her
O
p
e
rat
io
ns
4
Release
[
/
1
.
When the TV/DVD switch is set to TV, the
remote performs the following:
* For two-digit numbers, if you use the number
buttons to select the TV’s programme position,
press -/-- followed by the number buttons.
To operate the
t
TV/DVD button
(for SCART connections only)
The
t
TV/DVD button switches between the
recorder and the last input source selected on the
TV. Point your remote at the recorder when using
this button. The button works even if the TV/DVD
switch is set to DVD.
When you connect the recorder to the TV via the
SCART jacks, the input source for the TV is set to
the recorder automatically when you start
playback. To watch another source, press the
t
TV/DVD button to switch the TV’s input
source.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the one
that works with your TV.
Button
Operation
[
/
1
Turns your TV on or off
2
(volume) +/–
Adjusts the volume of
your TV
t
TV/DVD
Switches your TV’s
input source
PROG +/–
Selects the programme
position on a Sony TV
Number buttons
and SET, -/--*
Selects the programme
position on a Sony TV
(wide mode)
Switch to or from the
wide mode of a Sony
wide-screen TV.
Manufacturer
Code number
Sony
01 (default)
Grundig
04
Hitachi
06
Panasonic
05, 12
Philips
02, 03
Samsung
13
Sanyo
07
Sharp
08
Thomson
11
Toshiba
10
JVC
09
Manufacturer
Code number