2-8
DSC-W150/W170_L2
2-4. ZOOM MOTOR REPLACING METHOD
2-4-1. Zoom Gear Block Replacing Method
Removal
1
Remove one screw.
2
Break solders.
3
Remove the Zoom Gear Block.
4
Remove the Naruto Gear.
3
Install the Zoom Gear Block after matching the position of boss.
4
Solder the flexible board of Zoom Gear Block.
5
Tighten one screw.
*
Tightening torque = 0.098
±
0.01N
•
m (1.0
±
0.1kgf
•
cm)
Installation
1
Confirm the lens barrel is stored.
2
Confirm the direction of the Naruto Gear and install it.
1
1
Screw
3
Zoom Gear Block
3
Zoom Gear Block
2
Solders
5
Screw
Boss
4
Solders
4
Naruto Gear
2
Naruto Gear
Adjust convex part to the CCD side.
