1-3
DSC-W5/W7/W15/W17
1-5. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)
Note: 1
When replacing the SY-001 board, erase the data in internal memory of the board before replacement.
Note: 2
When replacing the SY-001 board or the IC381 on the SY-001 board, execute formatting and initialize the internal memory after
replacement.
Method for Copying the Data in Internal Memory
Method for Formatting the Internal Memory
Copies all images in the internal memory to a “Memory Stick”.
1
Insert a “Memory Stick” having 32 MB or larger capacity.
2
Select [OK] with
v
on the control button, then press
z
.
The message “All data in internal memory will be copied Ready?” appears.
3
Select [OK] with
v
, then
z
.
Copying starts.
•
Use fully charged Nickel-Metal Hydride batteries or the AC Adaptor (not supplied). If you attempt to
copy image files using batteries with little remaining charge, the batteries may run out, causing copying to
fail or possibly corrupting the data.
•
You cannot copy individual images.
•
The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick” after copying, then execute the [Format] command in
Internal Memory Tool).
•
You cannot select a folder copied on a “Memory Stick”.
•
A
(Print order) mark added to an image is deleted when you copy data.
Copy
OK
See the following procedure.
Cancel
Cancels the copying.
Copying
102_COPY
Formats the internal memory.
•
Note that formatting irrevocably erases all data in the internal memory, including even protected images.
1
Select [OK] with
v
on the control button, then press
z
.
The message “All data in internal memory will be erased Ready?” appears.
2
Select [OK] with
v
, then press
z
.
The format is complete.
Format
OK
See the following procedure.
Cancel
Cancels the formatting.
