66
•
The flash does not strobe when shooting in
Burst 3, Exposure Bracket, Twilight, MPEG
Movie or Multi Burst mode.
•
You cannot have an external flash and the built-
in flash strobe at the same time.
•
Note that when shooting with two or more
external flashes, the camera functions may not
operate normally, or the camera may
malfunction.
•
You can carry out this operation even when the
mode dial is set to
(Clip Motion).
•
If the white balance cannot be adjusted when
shooting with an external flash, set the flash
mode to (Forced flash) or
(Slow
synchro), and set the one-push white balance
mode (page 55).
Using the Sony flash (not
supplied)
You can mount the Sony HVL-F32X or
HVL-F1000 flash on the advanced
accessory shoe of your camera. The HVL-
F32X is also equipped with automatic flash
level adjustment and AF fill light shooting
functions.
a
Mount the external flash on the
advanced accessory shoe.
b
Plug the flash into the ACC
jack.
When using the HVL-F32X, you do
not need to perform step
2
.
c
Turn on the external flash.
d
Set the mode dial to
, P, S,
A, M or SCN.
e
Shoot the image.
•
When using a Sony optional external flash,
check that [Hot Shoe] is set to [Off] in the SET
UP settings (page 116).
Using a commercially
available external flash
You can mount a commercially available
external flash that supports advanced
accessory shoe.
a
Mount the external flash to the
advanced accessory shoe.
b
Set the mode dial to SET UP.
c
Select
(Camera 2) with
v
/
V
,
[Hot Shoe] with
B
/
v
/
V
, [On]
with
B
/
v
, then press
z
.
d
Turn on the external flash.
e
Set the mode dial to M or A.
The flash also strobes when the mode
dial is set to
, P, S, SCN or
(Clip Motion), but we recommend
recording with the mode dial set to M
or A.
f
Shoot the image.
SL
2
Summary of Contents for CYBER-SHOT DSC-V1
Page 131: ......
