2-4
DSC-U50
2-2. MAIN CABINET ASSY
tape
2
Two screws
(lock ace)
1
Make JIG as shown in a figure.
38mm
16mm+
1mm
1mm
4
Two screws
(lock ace)
Jig
3
Rotate the lens cabinet section.
5
Put the lens cabinet section
back in its place.
Main cabinet assy
Jig
6
Put the tip of Jig into the position of a figure.
7
Push the battery holder and LCD section
until a 1mm crevice opens.
8
Apply power in the direction of
arrow
A
by JIG, and remove boss.
Apply power in the direction of
arrow
A
by JIG, and remove boss.
9
Slide the main cabinet assy.
Slide the main cabinet assy.
0
Push the LCD holder
for removing the boss.
Push the LCD holder for removing the boss.
LCD window
Boss
Boss
A
A
qs
Flexible board (CN916)
qa
Main cabinet assy
Note: Remove it while
taking care as
the flexible board
is connected.
