90
Warning indicators and messages
If a code starting with a letter of the
alphabet appears, your camera has a self-
diagnosis display. The last two digits
(indicated by
ss
) will differ depending on
the state of the camera.
If you are unable to solve the problem even
after trying the following corrective actions
a few times, contact your Sony dealer or
local authorized Sony service facility.
C:32:
ss
•
There is trouble with your camera’s
hardware. Turn the power off and on
again.
C:13:
ss
•
The camera cannot read or write data on
the “Memory Stick Duo”. Re-insert the
“Memory Stick Duo” several times.
•
The internal memory has experienced a
format error, or an unformatted
“Memory Stick Duo” is inserted.
Format the internal memory or the
“Memory Stick Duo” (page 50).
•
The inserted “Memory Stick Duo”
cannot be used with your camera, or the
data is damaged. Insert a new “Memory
Stick Duo” (page 93).
E:61:
ss
E:91:
ss
•
A camera malfunction has occurred.
Initialize the camera (page 52), then
turn the power on again.
If the following messages appear, follow
the instructions.
E
•
The battery level is low. Charge the
battery pack (
t
step 1 in
“Read This
First”
). Depending on the conditions of
use or the type of battery pack, the
indicator may flash even though there
are still 5 to 10 minutes of remaining
battery time left.
For "InfoLITHIUM" battery only
•
This battery pack is not a
“InfoLITHIUM” type.
System error
•
Turn the power off and then on again
(
t
step 2 in “Read This First”
).
Internal memory error
•
Turn the power off and then on again
(
t
step 2 in “Read This First”
).
Reinsert the Memory Stick
•
Insert the “Memory Stick Duo”
correctly.
•
The inserted “Memory Stick Duo”
cannot be used in your camera
(page 93).
•
The “Memory Stick Duo” is damaged.
•
The terminal section of the “Memory
Stick Duo” is dirty.
Memory Stick type error
•
The inserted “Memory Stick Duo”
cannot be used in your camera
(page 93).
Format error
•
Format the media again (pages 49 and
50).
Self-diagnosis display
Messages
