DSC-S60/S80/S90/ST80
2-7
2-8E
2-3. REMOVAL OF BARRIER UNIT
[BARRIER OPERATION TEST METHOD]
After the barrier unit is replaced, check the following items with turning the power of the set ON/OFF.
• The lens moves out and the barrier shutters open completely when the power is turned on.
• The lens moves in and the barrier shutters close completely when the power is turned off.
Checking condition is
1
downward
2
45
°
downward
3
horizontal
4
45
°
upward
5
upward; totally five positions
and check three times for each position.
The test needs to be performed only when the barrier unit is replaced.
No performance of this test is needed when the lens is replaced.
1
downward
2
45
°
downward
3
horizontal
4
45
°
upward
5
upward
3X
3X
3X
3X
3X
1
Switch on a power supply.
3
Switch off a power supply by taking out a battery
or cut off a power supply from AC daptor.
(without using camera's power swich)
4
Pinch
A
portion with finger
and fit a driver over a hollow.
A
2
Push zoom button and transform the lens
as shown below.
5
Ornamental fixed plate (A)
7
Barrier unit
6
Two screws
(M1.4
×
4.5)
2-4. CIRCUIT BOARDS LOCATION
Board Name
Function
CD-573
CCD IMAGER
CH-169
CCD SIGNAL PROCESS
(included in SY-126)
MC-153 flexible
MULTI CONNECTOR
MS-271
MEMORY STICK CONNECTOR
ST-122 flexible
FLASH DRIVE
SW-446
CONTROL SWITCH, LCD PANEL
SY-126
CAMERA MODULE, CAMERA DSP, CPU,
(including CP401
LENS DRIVE, BURST FLASH, SDRAM, AND FLASH
,
(
CH-169 board))
AUDIO, DC/DC CONVERTER, CONNECTOR
CD-573
SY-126
(including CP401 (
CH-169 board))
SW-446
ST-122 flexible
MS-271
MC-153 flexible
CH-169
(included in SY-126)
