Sony Cyber-shot DSC-RX100M4, Instruction Manual

Page: 77 / 319

may be damaged.
As long as the power is on, the battery pack will not be charged even if the camera is
connected to the AC Adaptor.
Under certain conditions, power may be supplied from the battery pack supplementarily
even if you are using the AC adaptor.
Do not remove the Micro USB cable while power is supplied from a wall outlet (wall
socket). Before you remove the Micro USB cable, turn off the camera.
Depending on the camera and battery temperature, the continuous recording time may be
shortened while power is supplied from a wall outlet (wall socket).
When using a mobile charger as a power source, confirm that it is fully charged before
use. Also, be careful of the remaining power on the mobile charger during use.
[13] How to Use Preparing the camera Charging the battery pack
Removing the battery pack
How to remove the battery pack
1. Make sure that the access lamp is not lit, and turn off the camera.
2. Slide lock lever
(A)
and remove the battery pack.
Be careful not to drop the battery pack.
[14] How to Use Preparing the camera Inserting a memory card (sold separately)
Inserting a memory card
How to insert a memory card
1. Open the memory card cover.