38
Viewing images on a TV screen
,
Connect the A/V multi cable
(supplied) to the multi
connector of the camera and
the audio/video input jacks of
the TV.
Place the camera with the LCD screen
facing upwards. If your TV has stereo input
jacks, connect the audio plug (black) of the
A/V multi cable to the left audio jack.
•
Turn off both your camera and the TV before
connecting the camera and the TV with the A/V
multi cable.
,
Turn on the TV and set the TV/
Video switch to “Video”.
•
The name and location of this switch may differ
depending on your TV. For details, see the
operating instructions supplied with the TV.
,
Set the mode dial to
, and
turn on the camera.
Press
b
/
B
on the control button to select the
desired image.
•
When using your camera abroad, it may be
necessary to switch the video output signal to
match that of your TV system (page 114).
1
To multi connector
A/V multi cable
2
TV/Video switch
BACK/NEXT
10:30
PM
2005 1 1
101-0002
VOLUME
3
VGA
60min
2
/
9
101
