Sony Cyber-shot DSC-P100 Operating Instructions Manual Download Page 96

Page: 96 / 128

Shooting still images/movies

The battery remaining
indicator is incorrect, or
sufficient battery
remaining indicator is
displayed but the power
runs out soon.

• You have used the camera in an extremely hot or

an extremely cold location.

• A deviation has occurred in the remaining

battery time.

• The battery pack is discharged.
• The battery pack is dead (page 118).

See page 118.

Fully discharge and then charge the battery pack so that the
battery remaining indicator functions correctly (page 12).

Install a charged battery pack (page 11).

Replace the battery pack with a new one.

The battery pack runs
down too quickly.

• You have used the camera in an extremely cold

location.

• The DC plug is dirty so the battery pack is not

charged enough.

• The battery pack is dead (page 118).

See page 118.

Clean the pins of the DC plug with a cotton swab, etc., and
charge the battery pack (page 11).

Replace the battery pack with a new one.

You cannot turn on the
camera.

• The battery pack is not installed correctly.
• The AC Adaptor is disconnected.
• The AC Adaptor has malfunctioned.

• The battery pack is discharged.
• The battery pack is dead (page 118).

Install the battery pack correctly (page 11).

Properly connect the AC Adaptor (page 14).

Consult your Sony dealer or local authorized Sony service
facility.

Install a charged battery pack (page 11).

Replace the battery pack with a new one.

The power turns off
suddenly.

• If you do not operate the camera for about three

minutes while the power is on, the camera turns
off automatically to prevent wearing down the
battery pack (page 15).

• The battery pack is discharged.

Turn on the camera again (page 15) or use the AC Adaptor
(page 14).

Install a charged battery pack (page 11).

Symptom

Cause

Solution

The LCD screen is not
turned on even when the
power is turned on.

• The power was turned off with the LCD screen

turned off the last time you used the camera.

Turn on the LCD screen (page 30).

The subject is not visible
on the LCD screen.

• The mode dial is not set to

, P, M, SCN or

Set it to

, P, M, SCN or

(page 10).

Symptom

Cause

Solution

Summary of Contents for Cyber-shot DSC-P100

































































































































Search results

Summary of Contents for Cyber-shot DSC-P100

Reviews:

Related manuals for Cyber-shot DSC-P100

Brands by name

Popular brands

Sony Cyber-shot DSC-P100, Operating Instructions Manual

Search results

Summary of Contents for Cyber-shot DSC-P100

Reviews:

Related manuals for Cyber-shot DSC-P100

Brands by name

Popular brands