Sony Cyber-shot DSC-HX350, Service Manual

Page: 11 / 70

Section 1
Trouble Shooting
1-1. Self-diagnosis Function
1-1-1. Self-diagnosis Function
If an error occurs in this unit, the self-diagnosis function starts working and a code consisting of one alphabet and a four-
digit number appears on the LCD. Classification of persons in charge, classification of faulty blocks, and details of errors
can be checked by referring to this indication of five alphanumeric characters in the self-diagnosis code table.
The history of past errors can be checked in “Usage and Diag record” on the DATA tab of the Adjust Manual.
The self-diagnosis function is also described in the operation manual.
1-1-2. Note on the Function of Boards
The boards and functions used in this model are mentioned in the following table.
Board Function
CD board Imager
BT board Battery
PD board LCD
SE board ROLL angular velocity sensor
ST board Flash control
HB board Flash
GP board Microphone unit, Pop-up sensor
PR board Manual ring rotation sensor
UM board HDMI connector, MULTI connector
SY board CPU, Power control, Lens control, PITCH/YAW angular velocity sensor, Other function
1-1-3. Self-diagnosis Code Table
Self-diagnosis Code
Symptom/State Correction
Repaired by:
Block
Function Detailed
Code
C 1 3 0 1 Memory card is unformatted or
memory card is broken. Format the memory card.
Insert a new memory card.
C 3 2 0 1 Trouble with hardware Turn power off and turn power on again.
E 4 1
0 0 *1
Abnormality of the wireless LAN
module or CPU The peripheral circuit of between CPU and wireless LAN
module may be faulty.
Replace the board that contains this peripheral circuit.
E 6 1 0 0 Difficult to adjust focus
(Cannot initialize focus) Turn power off and turn power on again. When this error is
not cleared, the focus control signal for the lens block may
be faulty.
Check whether this error is due to the lens or the board.
Replace the faulty lens or board.
Continued
*1: Function of this code is not provided in this unit.
DSC-HX350
1-1