![background image](http://html.mh-extra.com/html/sony/cx-jt7/cx-jt7_service-manual_420493007.webp)
7
CX-JT7
SECTION 2
GENERAL
This section is extracted from
instruction manual.
• LOCATION OF CONTROLS
1
DISC CHANGE/DISC SKIP
Rotates the CD trays.
2
POWER
6
STANDBY/ON
Switches the unit on and off (standby).
The red indicator flashes when receiving a signal from
the remote.
3
TAPE A/B
Selects Tape function, and deck A or B.
TUNER BAND
Selects Tuner function and the radio band.
MD (VIDEO)
Selects the function of external equipment connected to
MD (VIDEO) jacks.
CD
Selects CD function.
4
TREBLE/MIDDLE
Enhances high or middle frequency sound.
5
CD SYNC
Starts Automatic CD dubbing.
REC PAUSE/START
Starts recording.
6
PHONES jack
Plug in here an optional headphones set with a mini
stereo plug (ø3.5 mm). Speaker output is canceled.
MIC jack (Mexican, Chilean and Peruvian
models)
Connects the microphone here.
MIC MIXING (Mexican, Chilean and
Peruvian models)
Adjusts the microphone volume.
Main unit: front
Refer to the pages indicated in parentheses for details.
7
DISC DIRECT PLAY 1-3
Selects a disc.
8
z
OPEN/CLOSE
Opens or closes the disc compartment.
9
HEAVY, VOCAL, SALSA, TECHNO,
HIP HOP, MANUAL
Activates a graphic equalization curve.
0
MODE
Selects various modes (Play mode and Tape reverse, etc.)
when used in combination with ENTER and MULTI JOG.
ENTER
Fixes the modes and the time (Play mode and Tape
reverse, etc.) when used in combination with MODE and
MULTI JOG.
!
MULTI JOG
CD: skips to a previous or a succeeding track.
Tuner: selects a preset station.
Clock and Timer: sets the time.
Selects the mode and the time when used in combination
with MODE and ENTER.
@
VOLUME (10)
Adjusts the volume.
#
BASS
Adjusts low frequency sound.
SURROUND
Switches surround on and off.
i-Bass
Produces rich and clear low frequency sound.
$
DISPLAY
Displays the time and the remaining time for CD.
When the unit is off, press DISPLAY to switch between
DEMO, Clock and ECO display modes.
ALBUM
k
/
i
Selects a previous album or a succeeding album with
MP3-CDs.
PTY (
AEP and UK models
)
Displays a program type for RDS (Radio Data System)
%
r
TUNING DOWN,
t
TUNING UP
(
f
,
g
)
CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
a
PAUSE
CD and Tapes: pauses playback.
d
DIR (TAPE B)
CD and Tapes: starts playback.
s
STOP
CD and Tapes: stops playback.
Main unit: rear
Refer to the pages indicated in parentheses for details.
1
AM LOOP, FM 75
Ω
terminals
Plug in the supplied AM and FM antennas here.
2
MD (VIDEO) jacks
Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press MD (VIDEO).
Tip:
To change the displayed name for this function, turn the
unit on, then hold down MD (VIDEO) and press POWER
on the unit. Repeat the procedure to select “
MD
” or
“
VIDEO
”.
3
SPEAKER terminals
Connect the speaker cord of the supplied front speakers
here.
4
AC power cord
5
AC VOLTAGE selector (Chilean and
Peruvian models)
Switches AC voltage among 120V, 220V, and 230V- 240V.
Make sure it matches your local voltage.
Summary of Contents for CX-JT7
Page 91: ...91 CX JT7 MEMO ...