A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory Menu
49
Overwrite
Select to overwrite the file or not when there is
insufficient memory space to record the image.
Select
On
to allow overwriting. The oldest file or folder
is overwritten first.
Select
Off
to prohibit overwriting. In this case, a new
file cannot be stored.
Capacity warning
Select
On
to send a warning mail to the Administrator
when the built-in memory space is low or the memory is
full. Select
Off
if you do not want to send a warning
mail.
Note
When the Overwrite is set to
On
, a warning mail is not
sent to the Administrator.
SMTP server name
Type the name of the SMTP server to use for sending an
e-Mail, up to 64 characters.
Otherwise type the IP address of SMTP mail server.
Authentication
Select the authentication required when you send an e-
mail.
Off:
Select if no authentication is required when an e-
mail is sent.
On:
Select if authentication is required when an e-mail
is sent. Select one of the authentication methods
from the following and specify the
POP server
name
,
User name
and
Password
as required.
SMTP:
Select when SMTP authentication is
required.
POP before SMTP:
Select when POP before SMTP
authentication is required.
Note
When you set
Authentication
to
On
, make sure to select
either or both
SMTP
or/and
POP before SMTP
.
POP server name
This is necessary when
POP before SMTP
is selected
in
Authentication
.
Type POP (receiving mail) server name up to 64
characters. Otherwise type the IP address of POP server.
This setting is necessary when SMTP server that sends a
mail authenticates using the account of POP user.
User name, password
Type the user name and the password of the user who
has the mail account. This setting is necessary when
SMTP server that sends a mail authenticates.
Administrator e-Mail address
Type the e-Mail address of the recipient of the warning
mail (e-Mail address of the camera Administrator), up to
64 characters.
OK/Cancel
See “Buttons common to every menu” on page 28.
Alarm recording Tab — Setting the
Image Memory Function when
Detecting the Alarm
You can set to record the image file to the built-in
memory linked with the external sensor input or with the
built-in motion detection function.
Tip
Only in SNC-CS11, the image file including audio data
can be recorded.
Alarm recording
Select
On
to set to record the image file to the built-in
memory linked with the external sensor input or with the
built-in motion detection function.
Image file name
Type the file name you want to assign to the images
when saving in the built-in memory. You can use up to
10 alphanumeric characters, - (hyphen) and _
(underscore) for naming.
Suffix
Select a suffix to add to the file name.
Date & time:
The Date & time suffix is added to the
image file name.
The Date & time suffix consists of lower two-digits
of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits), second (2 digits)
