CMT-X5CD/X5CDB/X7CD/X7CDB
17
2-5. BLUETOOTH MODULE BLOCK, MAIN CHASSIS BLOCK-2
• Continued on 2-6 (page 18).
1
four screws
(BVTP2.6)
2
three screws
(BTTP
M2.6)
– Front bottom view –
3
Remove the main chassis block
in the direction of the arrow.
6
Peel off the
adhesive
sheet.
7
flexible flat cable (7P)
(CN004)
5
cushion
(touch)
4
BCO cushion
OK
NG
cushion (touch) BCO cushion
Wire setting
How to install the main chassis block
flexible flat cable (7P)
(FFC3)
MAIN board
both hands
one hand
colored line
colored line
Insert is straight to the interior.
Insert is incline
flexible flat
cable
flexible flat
cable
connector
connector
OK
NG
Note 1:
When installing the flexible flat cable,
ensure that the colored line is not
slanted after insertion.
main chassis block
Wire setting
Note 2:
When installing the main chassis block,
align two bosses and two holes.
Note 3:
When installing or removing the main chassis block,
be sure to use both hands. Do not perform either
procedure using only one hand.
Note 4:
When installing the main
chassis block, be careful
not to pinch the flexible
flat cable between the
main chassis block and
the rear panel block.
hole
hole
boss
boss
