A
d
d
it
ion
al
i
n
fo
rm
at
io
n
53
GB
To change the AM tuning interval
(except for European models)
The default setting for AM tuning interval is
9 kHz (or 10 kHz for some areas). Use the
buttons on the unit to perform this operation.
1
Press FUNCTION
on the unit repeatedly
to select the AM station.
2
Press
/
(power)
to turn off the system.
3
Press and hold FUNCTION
and press
/
(power)
on the unit.
“STEP 9K” or “STEP 10K” appears in the display
.
When you change the interval, all the AM preset
stations are erased.
Presetting radio stations
You can preset your desired radio stations.
1
Tune in the station you wish to
preset.
2
Press TUNER MEMORY
.
3
Press TUNE +/–
repeatedly to
select a preset number.
If another station is already assigned to
the selected preset number, the station
is replaced by the new station.
4
Press
to register the
station.
“COMPLETE” appears in the display
.
5
Repeat steps 1 through 4 to
register other stations.
You can preset up to 20 FM and 10 AM
stations (CMT-SBT300W), or 20 DAB/
DAB+ and 20 FM stations (CMT-
SBT300WB).
To tune in to a preset radio
station
Press TUNING MODE
repeatedly until
“PRESET” appears in the display
, and
then press TUNE +/–
to select the preset
number to which the desired station is
registered.
Running the DAB Automatic
Scan manually (CMT-
SBT300WB only)
Before you can tune in DAB/DAB+ stations,
you must perform a DAB Initial Scan.
When you have moved to another area, also
perform the DAB Initial Scan manually to
update the DAB/DAB+ service information.
1
Press TUNER FUNCTION
repeatedly until “DAB” appears in
the display
.
Press FUNCTION
on the unit
repeatedly until “DAB” appears in the
display
.
2
Press OPTIONS
to display the
setting menu.
3
Press
/
repeatedly to
select “INITIAL,” then press
.
4
Press
/
repeatedly to
select “OK,” then press
.
Scanning begins. The scanning
progress is indicated by asterisks
(*******). Depending on the DAB/DAB+
services available in your area,
scanning may take a few minutes.
When scanning is complete, a list of
available services is created.
Notes
•
If your country or region does not support DAB/
DAB+ broadcast,“NO SERV” appears.
•
This procedure clears all previously stored
presets.
•
Before unplugging the DAB/FM lead antenna,
make sure the system is turned off to preserve
your own DAB/DAB+ settings.
Preset number