manualshive.com logo in svg

Sony CMT-M100, Operating Instructions Manual, Page: 24 / 64

Share
Download
Sony CMT-M100 Operating Instructions Manual Download Page 24

24

Notes

• You cannot pause recording during High-Speed

CD-MD Synchro Recording.

• If the play mode is set to the Repeat or Shuffle Play,

it automatically switches to normal play at step 4 of
“Recording a CD on an MD”.

• The following items are either inoperative or cannot

be used during High-Speed CD-MD Synchro
Recording:
— The Auto Cut Function
— The recording level specified in the Setup menu

Recording a tape on an MD

— TAPE-MD Synchro Recording

You can make an analogue recording of a tape
on an MD.

You can use TYPE I (normal) tape.

1

Load a recordable MD.

2

Load a tape you want to record.

3

Press SYNCHRO MODE repeatedly until
“TAPE-MD SYNC” appears.

4

Press ENTER/START.

“Press START” flashes.
The MD deck stands by for recording and
the tape deck pauses for play.

Tape playback side

N

 appears for the top side, and 

n

 for the

bottom side. To play the side not indicated,
press 

x

 and remove the cassette to reverse

the tape side, then perform steps 3 and 4
again.

5

Press PLAY MODE/DIRECTION
repeatedly until 

g

 appears to play one

side or 

h

 (or 

j

) to play both sides.

6

Press ENTER/START while “Press
START” flashes.

Recording starts.
When the recording is completed, the tape
deck and the MD deck stop automatically.

To stop recording

Press 

x

.

Note

If the MD becomes full during recording, the tape
deck and the MD deck stop automatically.

Recording a CD on an MD (continued)

Summary of Contents for CMT-M100

































































Reviews:

No comments