16
HCD-HX3/HX5/HX7
CD SERVICE MODE
This mode can run the CD sled motor freely. Use this mode, for
instance, when cleaning the optical pick-up.
Procedure:
1. Press the
I/
1
button to turn the power on.
2. Press the
[FUNCTION]
button to select “CD” (HX3/HX7).
Press the
[CD]
button on the remote commander to select “CD”
(HX5).
3. Press three buttons of
[SEARCH]
,
+ and
Z
simultaneously,
the message “SERVICE MODE” is displayed on the
fluorescent indicator tube.
4. Press the
– button to move the optical pick-up to inside
track and the message “SLED IN” is displayed on the
fluorescent indicator tube, or press the
+ button to outside
track and the message “SLED OUT” is displayed on the
fluorescent indicator tube.
5. Press the
[DSGX]
button, “LD ON” or “LD OFF” is displayed
on the fluorescent indicator tube. Each time
[DSGX]
button is
pressed, laser diode on/off is changed over.
6. To release this mode, press the
I/
1
button.
BT TEST MODE
(HX5/HX7)
This mode is used to check the firmware version and address of
bluetooth module.
Procedure:
1. Press the
I/
1
button to turn the power on.
2. Press the
[FUNCTION]
button to select “BLUETOOTH”
(HX7).
Press the
[FUNCTION]
button on the remote commander to
select “BLUETOOTH” (HX5).
3. Press three buttons of
[SEARCH]
,
– and
[BLUTOOTH OPR]
simultaneously, the message “BT Test” is displayed on the
fluorescent indicator tube. Then, the display is automatically
changed to the firmware version of bluetooth module.
4. Press the
[DISPLAY]
button, address of bluetooth module is
displayed on the fluorescent indicator tube.
5. To release this mode, press the
I/
1
button.
