background image

CMT-HX3.GB.3-095-514-11(1)

GB

“Reading” is displayed for a long 

time.

 It may take a while to finish reading the 

USB device if there are many folders 

or files on it. Thus, we recommend 

following these guidelines.

 Total folders on USB device: 100 or 

less

 Total files per folder: 100 or less

Erroneous display

 Send the music data to the USB device 

again, as the data stored in the USB 

device may have been corrupted.

Play does not start.

 Turn off the system, then reconnect the 

USB device.

 Connect the USB device that this 

system can play.

 Press 

 (or USB 



 on the unit) 

 to start play.

Play does not start from the first 

track.

 Set the play mode to Normal Play 

mode.

Files cannot be played back.

 USB storage media formatted with file 

systems other than FAT16 or FAT32 

are unsupported.*

 If you use partitioned USB storage 

media, only files on the first partition 

can be played.

 Files that are encrypted or protected by 

passwords, etc. cannot be played back.

*  This system supports FAT16 and FAT32, but 

some USB storage media may not support all 

of these FAT. For details, see the operation 

manual of each USB storage media or 

contact the manufacturer.

Tuner

Severe hum or noise, or stations 

cannot be received. (“TUNED” or “ST” 

flashes on the display.)

 Connect the antenna properly.

 Find a location and an orientation that 

provide good reception, and then set 

up the antenna again.

 Keep the antennas away from the 

speaker cords, the power cord and the 

USB cable to avoid picking up noise.

 Connect a commercially available 

external antenna.

 Consult your nearest Sony dealer if the 

supplied AM antenna has come off the 

plastic stand.

 Turn off nearby electrical equipment.

To change the AM tuning interval

The AM tuning interval is factory-preset 

to 9 kHz (or 10 kHz, for some areas; this 

function is not available on the European 

model).

Use buttons on the unit to change the 

AM tuning interval.

Tune in any AM station, and then 

turn off the system.

While holding down TUNER/BAND 

, press 

/

 

.

All the AM preset stations are erased. 

To reset the interval to the factory 

preset, repeat the procedure.

Summary of Contents for CMT-HX3

































Reviews: