![background image](http://html.mh-extra.com/html/sony/cmt-hpx11d/cmt-hpx11d_operating-instructions-manual_420375048.webp)
48
GB
Use the buttons on the unit for the operation.
1
Connect audio cords.
See “Hooking up optional components” on
page 47.
2
Press FUNCTION repeatedly until “MD”
or “VIDEO” appears.
Playback starts on the selected component.
Notes
• If you cannot select “VIDEO” by pressing
FUNCTION repeatedly, turn off the system and then
press
?/1
on the unit while holding down
FUNCTION on the unit. The function will change
from “MD” to “VIDEO”, and “VIDEO” will appear
in the display. To change back to “MD”, repeat the
same procedure.
• You cannot switch the MD/VIDEO function in
Power Saving Mode (page 43).
1
Connect a digital optical cable.
See “Hooking up optional components” on
page 47.
2
Connect 6 speakers to an AV amplifier
equipped with a decoder.
For speaker placement, refer to the
operating instructions supplied with the
connected amplifier.
3
Switch the output to 5.1 channel Dolby
Digital sound or 5.1 channel DTS
sound.
See “Changing the sound/subtitle/
language” on page 22.
Tip
You cannot use the surround effect of this system.
Listening to audio from a
connected component
Enjoying 5.1 channel
sound with an optional
amplifier
Summary of Contents for CMT-HPX11D
Page 67: ......