![background image](http://html.mh-extra.com/html/sony/cmt-hpx11d/cmt-hpx11d_operating-instructions-manual_420375047.webp)
O
p
tiona
l Com
pone
nts
47
GB
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
A
MD/VIDEO IN jacks
Use audio cords (not supplied) to connect an
optional analog component (MD deck, etc.) to
these jacks. You can then listen to the sound
from the component.
B
DIGITAL OUT (OPTICAL) jack
Use a digital optical cable (square, not supplied)
to connect an amplifier with a digital optical
input jack. Sound is then output when the system
function is set to DVD. By connecting this
system to the optical input jack of the optional
amplifier equipped with Dolby Digital or DTS
decoder, you can enjoy the 5.1 channel sound. If
the jack is covered with a cap, remove it before
use.
Notes
• Digital audio can be output only when playing a CD
or a DVD.
• You can record digital audio from this system only
when the DVD function is selected.
C
COMPONENT VIDEO OUT
jacks
Use an optional video cord to connect a TV. If
your TV accept progressive format file signals,
you must use this connection and set
“COMPONENT OUT” to “PROGRESSIVE” in
“Adjusting the TV screen” (page 25).
D
S VIDEO OUT jack
Use an S video cord (not supplied) to connect an
optional TV to this jack. You can enjoy higher
quality video images.
Optional Components
Hooking up optional components
A
B
D
C
MD deck, etc.
From the audio output jacks of
an optional analog component
Amplifier or MD deck
TV
To the digital input jack of
the digital component
To the component video
input jack of the TV or
projector
TV or projector
To the S video
input jack of the
TV
Summary of Contents for CMT-HPX11D
Page 67: ......