![background image](http://html.mh-extra.com/html/sony/cmt-gp6v/cmt-gp6v_operating-instructions-manual_420355015.webp)
T
une
r
15
GB
5
Repeat steps 1 through 4 to preset
other stations.
Manual tuning preset
You can manually tune in and store the radio
frequency of the desired stations.
1
Press TUNER/BAND repeatedly to
select FM or AM.
2
Press PLAY MODE/TUNING MODE
repeatedly until “AUTO” and
“PRESET” disappear from the display.
3
Press /– repeatedly to tune in
the desired station.
4
Press TUNING MEMORY on the remote.
The preset number appears. Station storage
starts with preset number 1. If preset
stations have been erased, then stations are
stored to the lowest preset number
containing no station.
5
Repeat steps 1 through 4 to preset
other stations.
Other Operations
To improve tuner reception
When tuner reception is poor, set CD player
power off by the CD power manage function.
CD power is factory set to on.
1
Press CD on the remote to switch the
function to CD.
2
Press
?/1
to turn off the system
.
3
Press CD
NX
while holding
x
.
“OFF” appears.
To set the CD power on
Repeat the procedure above and “ON” appears.
Note
When “OFF” is selected, CD access time is increased.
To change the AM tuning interval
(except for Middle Eastern
model)
The AM tuning interval is factory-preset to 9
kHz (or 10 kHz for some areas). To change the
AM tuning interval, tune in any AM station first.
While holding TUNER/BAND, press
?/1
.
When you change the interval, all the AM/FM
preset stations are erased. To reset the interval,
tune in any AM station first. While holding
TUNER/BAND, press
?/1
.
Tips
• The preset stations are retained for half a day even if
you disconnect the power cord or if a power failure
occurs.
• To improve the reception, adjust the supplied
antennas or connect an external antenna.
To
Do this
Tune in a station
with a weak signal
Follow the procedure described
in “Manual tuning preset”
(page 15).
Erase a preset
station
1
Select the preset number of
the station to be erased.
2
Press CLEAR on the remote.
3
Press ENTER on the remote.