![background image](http://html.mh-extra.com/html/sony/cmt-ex100/cmt-ex100_operating-instructions-manual_420336010.webp)
10
To enter track number 10 or over
on the remote
1
Press >10.
2
Enter the corresponding number buttons.
To enter 0, press 10/0 instead.
Example:
To enter track number 30, press >10, then 3 and 10/0.
Notes
• Do not forcibly press the disc down with your
finger, as this may cause CD player trouble.
Furthermore, do not obstruct the ejecting CD. Be
sure to touch OPEN/CLOSE
Z
(or press OPEN/
CLOSE
Z
on the remote) to lower the disc tray.
• The disc tray will not operate if you touch OPEN/
CLOSE
Z
while wearing gloves. Touch OPEN/
CLOSE
Z
with bare hands or press OPEN/
CLOSE
Z
on the remote.
Press
x
.
Pause
Press
NX
(or
X
on the remote).
Press again to resume play.
Stop play
Select a track
Press
.
or
>
repeatedly until
you find the desired track.
Touch OPEN/CLOSE
Z
(or press
OPEN/CLOSE
Z
on the remote).
Play repeatedly
(Repeat Play)
Press REPEAT on the remote
during play until “REP” or
“REP 1” appears.
REP: For all the tracks on the CD.
REP 1*: For a single track only.
To cancel playing repeatedly, press
REPEAT on the remote until
“REP” or “REP 1” disappears.
* You cannot repeat only one track during Shuffle
Play and Program Play.
Tip
If you press a number button on the remote, the track
corresponding to the pressed number on the disc starts
playing (
Track Direct Play
).
Find a point in
a track
Keep pressing
m
or
M
during
play and release it at the desired
point.
Remove a CD
Playing a CD (continued)
Other Operations
To
Do this
Summary of Contents for CMT-EX100
Page 23: ......