![background image](http://html.mh-extra.com/html/sony/cmt-dc1/cmt-dc1_service-manual_420302013.webp)
HCD-DC1
12
SECTION 4
TEST MODE
Start
REC pause for 3 seconds
FWD REC
Fast forward
REV Play
REC pause for 3 seconds
REV REC
Rewind
FWD Play
Shut off
Shut off
Shut off
Shut off
1 minute
3 minutes
1 minute
3 minutes
Start
Open the disc tray
Close the disc tray
Play the last track
[Cold Reset]
• The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning
the set to the customer.
Procedure:
1. Turn ON the power.
2. Press three buttons
x
(TAPE),
x
(CD), and
[TUNER/BAND]
simultaneously.
3. The set is reset.
[Liquid Crystal Display All Lit Check Mode]
Procedure:
1.
Set to standby state.
2.
Press three buttons of
x
(TAPE),
x
(CD), and
[FUNCTION]
simultaneously.
3.
Liquid crystal display are all turned on.
4.
To exit from this mode, press the
I/
1
button to turn the power
OFF.
[Tape Deck Aging Mode]
This mode can be used for operation check of tape deck section.
Procedure:
1.
Set a tape in the tape deck.
2.
Set to standby state.
3.
Press three buttons of
x
(TAPE),
x
(CD), and
[+]
(TUNING)
simultaneously.
4.
The aging is executed in bellow sequence.
5.
To exit from the aging mode, press the
I/
1
button to turn the
power OFF.
Aging mode sequence:
[CD Aging Mode]
This mode can be used for operation check of CD section.
Procedure:
1.
Load a CD disc.
2.
Set to standby state.
3.
Press three buttons of
x
(TAPE),
x
(CD), and
[--]
( TUNING)
simultaneously.
4.
The aging is executed in bellow sequence.
5.
To exit from the aging mode, press the
I/
1
button to turn the
power OFF.
Aging mode sequence:
Summary of Contents for CMT-DC1
Page 55: ...3 SS CDC1 MEMO ...