![background image](http://html.mh-extra.com/html/sony/cmt-cp1-micro-hi-fi-component-system/cmt-cp1-micro-hi-fi-component-system_operating-instructions-manual_420280005.webp)
5
Getting Started
Jack type
B
AM
ANTENNA
U
FM
75
Ω
U
3
For models with a voltage selector,
set VOLTAGE SELECTOR to the
local power line voltage.
VOLTAGE
SELECTOR
110V~120V
220V~240V
4
Connect the power cord to a wall
outlet.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
Inserting two size-AA (R6)
batteries into the remote
E
E
e
e
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Notes on batteries
• Make sure the battery poles (plus/minus) are
properly oriented.
• Do not use a new battery with an old one.
• Do not use different types of batteries together.
• If you do not use the remote for a long period of
time, remove the batteries to prevent possible
damage from battery leakage and corrosion.
• Do not use a battery that is leaking.
• If a battery has leaked, clean the battery
compartment and replace all the batteries.
• Do not place the remote in an extremely hot or
humid place.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
AM loop
antenna
Extend the FM
wire antenna
horizontally