Sony CMT-BX7DAB, Operating Instructions Manual

Page: 16 / 32

CMT-BX7DAB.GB.3-095-508-11(1)
1
GB
1
Select the USB function.
Press USB

.
2
Connect an optional USB device
(Digital music player or USB
storage media) to the (USB)
port

as shown below.
When USB cable connection is
necessary, connect the USB cable
supplied with the USB device to be
connected.
See the operation manual supplied
with the USB device to be connected
for details on the operation method.
When the USB device is connected,
the display changes as follows:
“READING”

“ATRAC AD
1)
” or
“STORAGE DRIVE 2) ”
1)
When connecting a digital music player.
2)
When connecting USB storage media. The
volume label is displayed next if recorded.
Note
It may take about 10 seconds before
“READING” appears depending on the type of
USB device connected.
3
Start playback.
Press

(or USB

on the unit)

.
4
Adjust the volume.
Press /

(or VOL +/

on
the unit)

.
Other operation
To Press
Pause playback

(or USB

on
the unit)

. To resume
play, press the button
again*.
Stop playback


. To resume play,
press

(or USB

on the unit)

.
To cancel resume play,
press


again.
Select a folder
+/
 
.
Select a file

/
 
.
Find a point in
a file
Hold down

/


during playback,
and release the button
at the desired point.
Select Repeat
Play
REPEAT

repeatedly
until “REP” or “REP1”
appears.
Remove the
USB device
Hold down
 
on
the unit in stop mode
until “NO DEVICE”
appears, then remove
the USB device.
* When playing a VBR MP3 file, the system
may resume playback from a different point.
To change the play mode
Press PLAY MODE

repeatedly while
the USB device is stopped. You can
select normal play (“ ” for all files in
the folder on the digital music player),
shuffle play (“SHUF” or “ SHUF”), or
program play (“PGM”).
USB device (Digital
music player or USB
storage media)