![background image](http://html.mh-extra.com/html/sony/cmt-bx3r/cmt-bx3r_operating-instructions-manual_420273011.webp)
CMT-BX3R.GB.3-095-505-11(1)
11
GB
G
etting S
tar
ted
Power
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Connect the power cord to a wall socket.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
When carrying this system
1
Remove a disc to protect the CD
mechanism.
2
Press CD
to select the CD
function.
3
Hold down TUNER/BAND
and
DSGX
on the unit, and press
on the unit until “STANDBY” appears.
4
After “LOCK” appears, unplug the
power cord.
To use the remote
Slide and remove the battery
compartment lid
, and insert the two
supplied R6 (size AA) batteries,
side
first, matching the polarities shown
below.
Notes
With normal use, the batteries should last for
about six months.
Do not mix an old battery with a new one or
mix different types of batteries.
If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
Setting the clock
Use buttons on the remote to set the
clock.
1
Press
/
to turn on the
system.
2
Press CLOCK/TIMER SET
.
If the current mode appears on
the display, press
/
repeatedly to select “CLOCK SET”
and then press ENTER
.
3
Press
/
repeatedly
to set the hour, and then press
ENTER
.
4
Use the same procedure to set
the minutes.
The clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
To display the clock when the system
is off
Press DISPLAY
. The clock is displayed
for about 8 seconds.